View FDB5680_6460330.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

fdp5680/FDB5680 rev. c july 2000 ? 20 00 f air child semiconductor international

?
?
!!"#!"!!$ !"!%!&!"!!" ' $"!!$!"" (" % (")
*+ %,!"!! absolute maximum ratings t c = 25c unless otherwise noted symbol parameter fdp5680 FDB5680 units v dss drain-source voltage 60 v v gss gate-source voltage 20 v i d maximum drain current - continuous 40 a - pulsed 120 total power dissipation @ t c = 25 c 65 w p d derate above 25 c 0.43 w/ c t j , t stg operating and storage junction temperature range -65 to +175 c thermal characteristics r jc thermal resistance, junction-to-case 2.3 c/w r ja thermal resistance, junction-to-ambient 62.5 c/w package marking and ordering information device marking device reel size tape width quantity FDB5680 FDB5680 13 ?? 24mm 800 fdp5680 fdp5680 tube n/a 45 s d g s g d to-220 fdp series d g s to-263ab fdb series -$.#$!!/0123-$4! !( " " $ " !( " 5 "! ! $(!$"!"""!!"!)$! 67/ "!" -$/0123-)$! !") $ $! "$ /0123- )$ "4
"! ! ! 5 ") ( ! )$ $ $ " !(
fdp5680/FDB5680 rev. c electrical characteristics t c = 25 c unless otherwise noted symbol parameter test conditions min typ max units drain-source avalanche ratings (note1) w dss single pulse drain-source avalanche energy v dd = 30 v, i d = 40a 90 mj i ar maximum drain-source avalanche current 40 a off characteristics bv dss drain-source breakdown voltage v gs = 0 v, i d = -250 a60 v ? bv dss ? t j breakdown voltage temperature coefficient i d = -250 c60 mv/ c i dss zero gate voltage drain current v ds = 48 v, v gs = 0 v 1 a i gssf gate-body leakage current, forward v gs = 20 v, v ds = 0 v 100 na i gssr gate-body leakage current, reverse v gs = -20 v, v ds = 0 v -100 na on characteristics (note 1) v gs(th) gate threshold voltage v ds = v gs , i d = 250 a22.54v ? v gs(th) ? t j gate threshold voltage temperature coefficient i d = -250 c-6.4 mv/ c r ds(on) static drain-source on-resistance v gs = 10 v, i d = 20 a, v gs = 10 v, i d = 20 a,t j = 125 c v gs = 6 v, i d = 19 a 0.016 0.022 0.018 0.020 0.035 0.023 ? i d(on) on-state drain current v gs = 10 v, v ds = 5 v 20 a g fs forward transconductance v ds = 5 v, i d = 20 a 43 s dynamic characteristics c iss input capacitance 1850 pf c oss output capacitance 230 pf c rss reverse transfer capacitance v ds = 25 v, v gs = 0 v, f = 1.0 mhz 95 pf switching characteristics (note 1) t d(on) turn-on delay time 15 27 ns t r turn-on rise time 9 18 ns t d(off) turn-off delay time 35 56 ns t f turn-off fall time v dd = 30 v, i d = 1 a, v gs = 10 v, r gen = 6 ? 16 26 ns q g total gate charge 33 46 nc q gs gate-source charge 6.5 nc q gd gate-drain charge v ds = 30 v, i d = 20 a v gs = 10 v 7.5 nc drain-source diode characteristics and maximum ratings i s maximum continuous drain-source diode forward current (note 1) 40 a v sd drain-source diode forward voltage v gs = 0 v, i s = 20 a (note 1) 0.9 1.2 v

fdp5680/FDB5680 rev. c

! " # $ %& ! 0 10 20 30 40 50 60 70 80 01234 v ds , drain-source voltage (v) i d , drain-source current (a) v gs = 10v 4.0v 5.0v 4.5v 6.0v 0.8 1 1.2 1.4 1.6 1.8 2 2.2 0 1020304050607080 i d , drain current (a) r ds(on) , normalized drain-source on-resistance v gs = 4.0v 10v 5.0v 7.0v 4.5v 6.0v 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -50 -25 0 25 5 0 7 5 1 00 125 150 t j , junction temperature ( o c) r ds(on) , normalized drain-source on-resistance i d = 20a v gs = 10v 0 0.01 0.02 0.03 0.04 0.05 345678910 v gs , gate to source voltage (v) r ds(on) , on-resistance (ohm) i d = 20a t a = 125 o c t a = 25 o c 0 10 20 30 40 50 60 23456 v gs , gate to source voltage (v) i d , drain current (a) t a = -55 o c 25 o c 125 o c v ds = 5v 0.0001 0.001 0.01 0.1 1 10 100 00.20.40.60.811.21.4 v sd , body diode forward voltage (v) i s , reverse drain current (a) t a = 125 o c 25 o c -55 o c v gs = 0v
fdp5680/FDB5680 rev. c
8"!!9 ' ( ) *+!#
, - !.*+ . / 0 2 4 6 8 10 0 5 10 15 20 25 30 35 q g , gate charge (nc) v gs , gate-source voltage (v) i d = 20a v ds = 10v 20v 30v 0 500 1000 1500 2000 2500 0 102030405060 v ds , drain to source voltage (v) capacitance (pf) c iss c rss c oss f = 1mhz v gs = 0 v 0 300 600 900 1200 1500 0.0001 0.001 0.01 0.1 1 10 single pulse time (sec) power (w) single pulse r jc = 2.3 o c/w t c = 25 o c 0.1 0.5 1 10 100 1000 3000 10000 0.03 0.05 0.1 0.2 0.3 0.5 1 t ,time (ms) transient thermal resistance single pulse d = 0.5 0.1 0.05 0.02 0.2 duty cycle, d = t /t 1 2 r (t) = r(t) * r r =2.3 c/w jc jc jc t - t = p * r (t) jc c j p(pk) t 1 t 2 r ( t ) , n o r m a l i z e d e f f e c t i v e 1 0.1 1 10 100 1000 0.1 1 10 100 dc 10s 1s 100ms 10ms 1ms rds(on) limit v gs = 10v single pulse r jc = 2.3 o c/w t c = 25 o c i d drain current (a) v ds , drain-source voltage (v)
to-220 tape and reel data and package dimensions august 1999, rev. b 0.165 to-220 tube packing configuration: figur e 1.0 note/comments packaging option to-220 packaging information stan da rd (no f l ow code ) packaging type rail/tube qty per tube/box 45 box dimension (mm) 530x 130x 83 max qty per box 1,080 weight per unit (gm) 1.4378 s62z bulk 300 114x 102x 51 1,500 1.4378
to-220 (fs pkg code 37) to-220 tape and reel data and package dimensions, continued september 1998, rev. a 1:1 scale 1:1 on letter size paper dimensions shown below are in: inches [millimeters] part weight per unit (gram): 1.4378
to-263ab/d 2 pak packaging configuration: figure 1.0 components to-263ab/d 2 pak tape leader and trailer configuration: figure 2.0 cover tape carrier tape note/comments packaging option to-263ab/d 2 pak packaging information standard (no flow code) l86z packaging type reel size tnr 13" dia rail/tube - qty per reel/tube/bag 800 45 box dimension (mm) 359x359x57 530x130x83 max qty per box 800 1,080 weight per unit (gm) 1.4378 1.4378 weight per reel 1.6050 - moisture sensitive label drypack bag esd label f63tnr label 359mm x 359mm x 57mm standard intermediate box to-263ab/d 2 pak unit orientation fdb603al f 9835 fdb603al f 9835 fdb603al f 9835 fdb603al f 9835 f63tnr label sample static dissipative embossed carrier tape
p1 a0 d1 p0 f w e1 d0 e2 b0 tc wc k0 t dimensions are in inches and millimeters tape size reel option dim a dim b dim c dim d dim n dim w1 dim w2 dim w3 (lsl-usl) 24mm 13" dia 13.00 330 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.961 +0.078/-0.000 24.4 +2/0 1.197 30.4 0.941 0.1.079 23.9 27.4 see detail aa dim a max 13" diameter option dim a max w3 w2 max measured at hub w1 measured at hub dim n dim d min dim c b min detail aa notes: a0, b0, and k0 dimensions are determined with respect to the eia/jedec rs-481 rotational and lateral movement requirements (see sketches a, b, and c). 10 deg maximum component rotation 0.9mm maximum 0.9mm maximum sketch c (top view) component lateral movement typical component cavity center line 10 deg maximum typical component center line b0 a0 sketch b (top view) component rotation sketch a (side or front sectional view) component rotation user direction of feed to-263ab/d 2 pak embossed carrier tape configuration: figure 3.0 to-263ab/d 2 pak reel configuration: figure 4.0 dimensions are in millimeter pkg type a0 b0 w d0 d1 e1 e2 f p1 p0 k0 t wc tc t d 2 pak o263ab/ (24mm) 10.60 +/-0.10 15.80 +/-0.10 24.0 +/-0.3 1.55 +/-0.05 1.60 +/-0.10 1.75 +/-0.10 22.25 min 11.50 +/-0.10 16.0 +/-0.1 4.0 +/-0.1 4.90 +/-0.10 0.450 +/-0.150 21.0 +/-0.3 0.06 +/-0.02 to-263ab/d 2 pak tape and reel data and package dimensions, continued august 1999, rev. b
to-263ab/d 2 pak (fs pkg code 45) to-263ab/d 2 pak tape and reel data and package dimensions, continued august 1998, rev. a 1:1 scale 1:1 on letter size paper dimensions shown below are in: inches [millimeters] part weight per unit (gram): 1.4378
trademarks acex? coolfet? crossvolt? e 2 cmos tm fact? fact quiet series? fast ? fastr? gto? hisec? the following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms datasheet identification product status definition advance information preliminary no identification needed obsolete this datasheet contains the design specifications for product development. specifications may change in any manner without notice. this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only. formative or in design first production full production not in production disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. syncfet? tinylogic? uhc? vcx? isoplanar? microwire? pop? powertrench qfet? qs? quiet series? supersot?-3 supersot?-6 supersot?-8 ? rev. d
to-220 tape and reel data and package dimensions august 1999, rev. b 0.165 to-220 tube packing configuration: figur e 1.0 note/comments packaging option to-220 packaging information stan da rd (no f l ow code ) packaging type rail/tube qty per tube/box 45 box dimension (mm) 530x 130x 83 max qty per box 1,080 weight per unit (gm) 1.4378 s62z bulk 300 114x 102x 51 1,500 1.4378
to-220 (fs pkg code 37) to-220 tape and reel data and package dimensions, continued september 1998, rev. a 1:1 scale 1:1 on letter size paper dimensions shown below are in: inches [millimeters] part weight per unit (gram): 1.4378
to-263ab/d 2 pak packaging configuration: figure 1.0 components to-263ab/d 2 pak tape leader and trailer configuration: figure 2.0 cover tape carrier tape note/comments packaging option to-263ab/d 2 pak packaging information standard (no flow code) l86z packaging type reel size tnr 13" dia rail/tube - qty per reel/tube/bag 800 45 box dimension (mm) 359x359x57 530x130x83 max qty per box 800 1,080 weight per unit (gm) 1.4378 1.4378 weight per reel 1.6050 - moisture sensitive label drypack bag esd label f63tnr label 359mm x 359mm x 57mm standard intermediate box to-263ab/d 2 pak unit orientation fdb603al f 9835 fdb603al f 9835 fdb603al f 9835 fdb603al f 9835 f63tnr label sample static dissipative embossed carrier tape
p1 a0 d1 p0 f w e1 d0 e2 b0 tc wc k0 t dimensions are in inches and millimeters tape size reel option dim a dim b dim c dim d dim n dim w1 dim w2 dim w3 (lsl-usl) 24mm 13" dia 13.00 330 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 4.00 100 0.961 +0.078/-0.000 24.4 +2/0 1.197 30.4 0.941 0.1.079 23.9 27.4 see detail aa dim a max 13" diameter option dim a max w3 w2 max measured at hub w1 measured at hub dim n dim d min dim c b min detail aa notes: a0, b0, and k0 dimensions are determined with respect to the eia/jedec rs-481 rotational and lateral movement requirements (see sketches a, b, and c). 10 deg maximum component rotation 0.9mm maximum 0.9mm maximum sketch c (top view) component lateral movement typical component cavity center line 10 deg maximum typical component center line b0 a0 sketch b (top view) component rotation sketch a (side or front sectional view) component rotation user direction of feed to-263ab/d 2 pak embossed carrier tape configuration: figure 3.0 to-263ab/d 2 pak reel configuration: figure 4.0 dimensions are in millimeter pkg type a0 b0 w d0 d1 e1 e2 f p1 p0 k0 t wc tc t d 2 pak o263ab/ (24mm) 10.60 +/-0.10 15.80 +/-0.10 24.0 +/-0.3 1.55 +/-0.05 1.60 +/-0.10 1.75 +/-0.10 22.25 min 11.50 +/-0.10 16.0 +/-0.1 4.0 +/-0.1 4.90 +/-0.10 0.450 +/-0.150 21.0 +/-0.3 0.06 +/-0.02 to-263ab/d 2 pak tape and reel data and package dimensions, continued august 1999, rev. b
to-263ab/d 2 pak (fs pkg code 45) to-263ab/d 2 pak tape and reel data and package dimensions, continued august 1998, rev. a 1:1 scale 1:1 on letter size paper dimensions shown below are in: inches [millimeters] part weight per unit (gram): 1.4378
trademarks acex? bottomless? coolfet? crossvolt? e 2 cmos tm fact? fact quiet series? fast fastr? gto? the following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. life support policy fairchild?s products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. product status definitions definition of terms datasheet identification product status definition advance information preliminary no identification needed obsolete this datasheet contains the design specifications for product development. specifications may change in any manner without notice. this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains final specifications. fairchild semiconductor reserves the right to make changes at any time without notice in order to improve design. this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only. formative or in design first production full production not in production disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. supersot?-8 syncfet? tinylogic? uhc? vcx? hisec? isoplanar? microwire? pop? powertrench qfet? qs? quiet series? supersot?-3 supersot?-6 ? rev. e ?

▲Up To Search▲

Price & Availability of FDB5680

	To Download FDB5680 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .